Tru Vue product used:

In 2015, I won the Tru Vue® Annual Framing Competition for my recreation of one of Portland, Oregon’s most recognizable signs – the neon display outside the famed Voodoo Doughnut shop, which beckons hungry doughnut lovers long into the night. When I had the opportunity to re-frame a photograph of the sign, I aimed to capture the vibrancy of the iconic landmark with a design that borrowed from its colorful light and imagery that cuts through the city’s nighttime skies.

 

 

The Moment

 

Designing a framing package that enhances a piece is one of the great creative challenges of custom framing, where art and craftsmanship converge. After being challenged to recreate an old framing project, I knew just what piece I wanted to recreate – Voodoo Doughnut, not far from my custom framing shop, Columbia River Gallery, in Troutdale, Oregon. I began with a framing package that was too simple and neutral for a photograph of one of Portland’s best-known signs. My redesign used new materials in innovative ways and repurposed old materials within the structure.

 

 

The Design

 

Inspiration came from the neon glow of the sign, as well as a class I had attended on Prisma frames where I discovered the possibilities of integrating LED lighting into the design. My idea was to use lighting within the frame to bring light outside the boundary of the photo, making it seem as if the neon sign was illuminating the frame. I chose shapes and colors that matched the neon sign — a panel shaped frame in fuchsia with a candy “mosaic” pattern for the inner frame, and a nouveau shape in violet with a midnight blue pattern and pink lip for the outer frame.

 

 

Overcoming Challenges

 

Using the Prisma frames in this way presented some challenges. The frames were not meant to be stacked, and I needed to find a place to install the LED light strip. I addressed these issues by using the original frame and resizing it to secure the two Prisma frames together and provide space for the hanging hardware, which was also original. I also used the existing white mat board, wrapping it in a royal blue silk remnant to coordinate with the top mat, black with a Britecore blue bevel. This black-and-blue scheme flows into the photograph’s twilight sky, bare trees and shadowed brick buildings.

 

 

The piece was glazed with Museum Glass^®, which was essential to the design given the lights illuminating the inside of the frame.

 

 

Because of the way the lighting was designed, I needed an unpainted rabbet for the light to shine through in the right way, so I had to remove the paint from the rabbet. Several rounds of trial and error revealed the best way to remove the paint. Precision was important, as an even slightly uneven line would be obvious. Paint thinner was so strong that it ate into the masking tape used to create a straight line and into the frame itself. A Dremel tool was unwieldy for such a precise job. The ultimate solution was using acetone nail polish remover as paint stripper with aluminum masking tape to protect the edge. I removed the paint with a scraper and paper towels in an effort that took 10 hours to complete.

 

 

The Light at the End of the Tunnel

 

The incredible journey through experimentation yielded amazing results. The use of light, color, and shape blur the boundaries between the photograph and the framing package. Thus, resulting in a unique piece that I hope does justice to the subject it celebrates. I was chosen as the “Best In Show” winner for the 2015 framing competition, and customers continue to compliment the ingenuity of the piece on display at my shop. This is the greatest gratification, and I was proud to Raise My Glass and hit a hole-in-one with the Voodoo Doughnut piece.